Natural Gas Conversion: Beefeater Signature 3000

1. Replace the injector* on each valve with a 2.10 mm injector.
2. Pull off each knob on the front of the BBQ.
3. On the fascia surrounding the valve stem there will be a small hole at about 4 o’clock. Through that hole is a small screw. Use a flat head screwdriver to adjust this screw. It should be turned 180 degrees Counter Clockwise.
4. Do this adjustment to each valve and then replace the knobs.

Natural Gas Conversion: Beefeater Discovery

1. Replace the injector* on each valve with a 1.90 mm injector.
2. Pull off each knob on the front of the BBQ.
3. The Discovery has two different types of valves and they are adjusted differently.
   • Valve with the ignitor: On the fascia surrounding the valve stem there will be a small hole at about 4 o’clock. Through that hole is a small screw. Use a flat head screwdriver to adjust this screw. It should be turned 180 degrees Counter Clockwise.
   • Valves without ignitor: In the center of the brass spindle is a small hole. Through that hole is a small screw. Use a very thin flat-head screwdriver to reach the screw that is at the bottom of this hole. Turn the screw 180 degrees Counter Clockwise.
4. Replace the knob.

* injectors are also referred to as orifices in some literature.